12V/24V 100W Electric Oil Extractor Pump – 4L/Min DIY Engine Oil Change Kit
12V/24V 100W Electric Oil Extractor Pump – 4L/Min DIY Engine Oil Change Kit
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
12V/24V 100W Electric Oil Extractor Pump – 4L/Min DIY Engine Oil Change Kit
Extract Engine Oil From The Top
Skip the mess of crawling under the vehicle. This 12V/24V electric oil extractor pump lets you remove used oil through the dipstick tube for a cleaner, faster DIY oil change.
- 100W pure copper motor
- Up to approximately 4 L/min flow rate
- Topside extraction through the dipstick tube
- Leak-resistant locking hose connections
- 12V / 24V vehicle power options
Faster Oil Changes With Less Cleanup
Built for DIY maintenance without removing the drain plug or crawling under the vehicle.
100W Motor
Pure copper motor designed for steady oil extraction.
Up To 4 L/Min
Fast flow helps reduce the time spent draining used oil.
Leak-Resistant Setup
Locking fittings help secure the tubing during operation.
DIY Friendly
Connect the hoses, attach to the battery, and extract from above.
100W Pure Copper Motor
The pump uses a pure copper motor rated at 100W and approximately 2800 RPM to move warm engine oil efficiently through the extraction hose.
- 100W motor
- Approx. 2800 RPM
- Designed for automotive fluid extraction
- Aluminum alloy pump head
Designed To Help Reduce Leaks
Locking fittings and reinforced tubing help keep the inlet and outlet connections secure while oil is being transferred.
- Locking hose fittings
- Clear extraction tubing
- Defined inlet and outlet direction
- Durable connection points
No Need To Crawl Under The Vehicle
Insert the inlet hose through the dipstick tube and pump the used oil into a suitable container from above the engine bay.
- No drain plug removal
- No lifting or jacking the vehicle
- Less mess under the car
- Convenient for home maintenance
Topside Extraction vs. Traditional Draining
✓ Oil Extractor Pump
- ✓ Extract through dipstick tube
- ✓ No drain plug removal
- ✓ No crawling under the vehicle
- ✓ Cleaner oil transfer
- ✓ Convenient DIY setup
Traditional Drain Method
- ✕ Vehicle may need lifting
- ✕ Drain plug must be removed
- ✕ Oil can spill under the vehicle
- ✕ More cleanup required
- ✕ Less convenient for quick home service
Use The Pump With The Right Fluids
✓ Suitable For
- Engine oil
- Lubricating oil
- Gear oil
- ATF / transmission fluid
- Hydraulic oil
✕ Do Not Use For
- Gasoline / petrol
- Diesel fuel
- Water
- Brake fluid
- Corrosive liquids
Ready In 4 Steps
Warm The Engine
Run the engine briefly so the oil becomes easier to extract.
Connect The Hoses
Insert the inlet hose into the dipstick tube and route the outlet hose into a waste-oil container.
Connect To Power
Attach the red clamp to positive (+) and black clamp to negative (−).
Switch On & Extract
Turn on the pump and monitor the extraction until the oil transfer is complete.
For More Than Just Cars
Suitable for many machines and vehicles that use compatible lubricating oils.
Specifications
Important Use Notes
Warm the engine for a few minutes before extraction so the oil is less viscous.
Do not use the pump for gasoline, diesel fuel, water, brake fluid or corrosive liquids.
Do not operate the pump dry. Always confirm the inlet and outlet hose direction before switching it on.
Use a suitable waste-oil container and dispose of used oil according to local regulations.