No nearby power outlet?
Let daylight recharge it.
The built-in solar panel charges the rechargeable battery during daylight. No mains wiring is required for normal operation.
SOLAR CHARGINGSolar Motion Sensor Clip-On Outdoor Light
Solar Motion Sensor Clip-On Outdoor Light
100+ orders
in the last 24h
Regular price
$39.99
Regular price
$39.99
Sale price
Unit price
per
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
Solar Motion Sensor Clip-On Outdoor Light
Regular price
$39.99
Regular price
$39.99
Sale price
Unit price
per
Solar-powered clip-on outdoor light with 45 LED beads, a motion sensor, three lighting modes and a built-in rechargeable 18650 lithium battery (1500mAh, 3.7V). ABS + PS housing. Water-resistance rating not specified.
SOLAR MOTION SENSOR LIGHTING
Light where
you need it.
Add convenient illumination to a fence, patio edge or outdoor storage area. This clip-on solar light combines a built-in solar panel, motion sensing and three selectable lighting modes.
45 LED beadsSolar poweredClip-on design
MADE FOR THE LITTLE DARK SPOTS
Less hassle.
More useful light.
When an outdoor corner needs extra illumination, a wired fixture or permanent installation may not be the most convenient choice.
Don't want to drill a mounting hole?
Use the integrated clip.
Attach the light to a suitable stable edge, such as a fence rail or post, where the clip can grip securely.
CLIP-ON PLACEMENTNeed light only when someone passes?
Choose a motion-sensing mode.
Select a mode that uses motion-triggered brightness, or choose a low-light setting according to your preference.
3 LIGHTING MODES
A CLOSER LOOK
Small details.
Thoughtful function.
01
45 LED beads
A broad LED face provides the light source for the selected operating mode.
02
Built-in solar panel
The polycrystalline solar panel replenishes the built-in 18650 lithium battery (1500mAh, 3.7V) when it receives suitable daylight.
03
Compact outdoor format
Listed dimensions are approximately 17.8 × 10.5 × 10.8 cm. Confirm fit against the intended mounting edge.
04
Motion and light sensing
The listed motion detection range is approximately 3–8 m. Actual detection depends on placement and surroundings.
05
Spring clip mounting
Attach to a suitable edge that is stable enough to support the light. Check the grip before leaving it in position.
CHOOSE HOW IT LIGHTS
Three modes.
One simple button.
Press the mode button to cycle through the available settings. The selected mode determines how the light behaves after dark.
Dim light + motion boost
Stays on at a low brightness level after dark, then switches to brighter light when movement is detected.
Motion-activated bright light
Remains off until movement is detected, then turns on brightly for approximately 15 seconds.
Continuous dim light
Maintains a low light level through the night, depending on the battery charge available.
FLEXIBLE OUTDOOR PLACEMENT
A brighter corner
for everyday tasks.
Consider a fence post, patio rail, shed edge, garage area or garden path. Choose a location with good daytime sunlight and a stable edge for the clip.
Solar charging performance depends on sunlight exposure, weather and seasonal conditions. Shaded placement may reduce available charge.
SET UP IN A FEW STEPS
Position. Clip. Select a mode.
Choose a sunny spot
Place the light where the solar panel can receive direct daylight. Keep the panel clear of shade where possible.
Clip to a stable edge
Open the spring clip and attach it to a suitable fence rail, post or edge. Check that it is secure.
Select a lighting mode
Press the mode button to cycle through the three settings. Allow the battery to charge in daylight.
Water-resistance rating is not specified by the manufacturer. Avoid submersion and prolonged exposure to heavy rain until the rating is confirmed.
BEFORE YOU CHOOSE
A few useful
answers.
Does it need mains wiring?
No mains wiring is required for normal operation. The built-in solar panel charges the internal rechargeable battery.
How does the motion sensor work?
After dark, the selected mode determines whether the light stays dim, switches on brightly when movement is detected, or remains at a continuous low level. The listed detection range is approximately 3–8 m and may vary with placement.
How long does the bright light stay on?
The source listing states approximately 15 seconds for the motion-activated bright mode. Actual behaviour may vary with conditions and battery charge.
Can I leave it in heavy rain?
An official IP water-resistance rating is not specified. Do not submerge it or expose it to prolonged heavy rain until the rating is confirmed.
What is the difference between Style A and Style B?
The source listing provides Style A and Style B but does not clearly map either style to the warm-white or cool-white description. Check the selected variant with the seller before ordering if light colour is important.
What is included in the package?
The source listing states one solar motion sensor clip-on outdoor light. No additional mounting accessories are confirmed in the package list.