A gloss-focused coating
Designed for cosmetic improvement of older clear coat. Existing damage and application quality influence the final appearance.
Wipe-On Clear Coat
Wipe-On Clear Coat
100+ orders
in the last 24h
Regular price
$29.99
Regular price
$29.99
Sale price
$39.00
Unit price
per
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
Wipe-On Clear Coat
Regular price
$29.99
Regular price
$29.99
Sale price
$39.00
Unit price
per
A hand-applied, self-leveling clear coat with a gloss finish, intended for existing exterior automotive clear-coat surfaces.
- Wipe-on application with a suitable shop towel or applicator.
- Five volume and bottle-count options.
- Test a small area before treating a larger panel.
Before use
Flammable; read the product label and safety data sheet before use. Follow the application instructions. Prepare a clean, dry surface and work in a well-ventilated area with the required protective equipment.
The source safety data sheet lists serious health hazards, including possible cancer and genetic defects, aspiration danger if swallowed, skin and eye irritation, and possible organ damage from prolonged or repeated exposure.
Not intended to repair damage through the base coat or for use on vehicle windows. Coverage and finish depend on surface condition, preparation and application.
A HAND-APPLIED EXTERIOR FINISH
Wipe-On
Clear Coat
A high-gloss, self-leveling coating applied by hand to help improve the appearance of older, faded or thinning clear coat.
FOR THE FINISH ALREADY THERE
Prepare the surface.
Apply with care.
Allow time to cure.
Surface condition, preparation and application technique affect the result.
A closer look.
Bottle size and quantity vary by selected option.
WHEN AN OLDER FINISH LOOKS TIRED
A gloss layer.
A considered refresh.
Fading and thinning clear coat can change a vehicle's appearance. This coating is intended to add gloss and depth over a prepared, existing clear-coat surface.
Applied by hand
Use a folded shop towel or micro applicator, working carefully across the prepared panel.
Self-leveling properties
The coating is formulated to level as it settles. Careful preparation and controlled application remain essential.
START WITH THE SURFACE
Plan the job
around the finish.
For exterior clear-coat care
Consider a small test area on an older vehicle's existing clear coat before planning a full panel.
Repair damage that needs more
Deep gouges, missing paint and damage into the base coat need an appropriate repair process. This coating does not replace missing paint. Keep it off windows.
PLAN BEFORE YOU OPEN THE BOTTLE
Prep. Apply. Leave to cure.
Practice on a small section first. Follow the product label and application instructions throughout.
Application conditions: surface temperature 50–90°F (10–32°C), with humidity below 90%. Keep the panel above 50°F (10°C) during curing.
Clean and dry
Wash the surface, remove wax and grease as directed, and let it dry completely.
Prepare the applicator
Shake the capped bottle, remove its seal and wet a folded shop towel or micro applicator. Keep the application edge wet.
Work across the panel
Start at a top corner. Use light pressure and straight, overlapping passes. Work within 2–3 minutes; do not rework an area after that window.
Protect the fresh coating
Keep it untouched and dry for at least 24 hours. Wait at least 48 hours before hand-washing. Avoid automatic car washes.
BEFORE YOUR FIRST PANEL
The practical details.
Set realistic expectations and allow time for preparation and after-care.
Will it remove every scratch or restore missing paint?
No. It is intended to improve the appearance of existing clear coat. Deep scratches, base-coat damage and missing paint need a different repair process. The result depends on the surface and application.
Can I use it on windows?
No. The coating is not intended for vehicle windows.
When can I wash the vehicle?
Keep the coating dry and untouched for at least 24 hours, then allow at least 48 hours before hand-washing. Avoid automatic car washes. More product can extend curing time; follow the current label for full-cure requirements.
Can I keep wiping to fix a missed spot?
Stay within the stated 2–3-minute working window and avoid repeated passes. Once the coating starts setting, follow the product's rework instructions. Cured coating may require sanding or refinishing to remove.
Which bottle options are available?
Choose one 4 fl oz bottle, one 8 fl oz bottle, or packs of four, eight or sixteen 8 fl oz bottles.